OIL AND CHEMICAL TANKER OF 40 700 DWT (NOVOSHIP) – MT/ T „TROGIR“
DESIGN CHARACTERISTIC
The vessel is intended for worldwide service and suitable for loading, carriage, and simultaneous discharge of five different grades of black and/or white petroleum products. The vessel is also designed to carry 50% solution of caustic soda S.G. 1.53 at 67% filling of cargo tanks. Completely double hulled in way of cargo tanks, double bottom of B/15 depth and side protective tanks of not less than 2,00 m width. Structural elements within ballast tanks or above deck keeping inner tank walls smooth without obstructions.
MAIN PARTICULARS
CAPACITIES
|
Cargo tanks |
50 172 cu.m |
|
Slop tanks |
1 144 cu.m |
|
Heavy Fuel Oil |
1 697 cu.m |
|
Diesel Fuel Oil |
173 cu.m |
|
Lubricating Oil |
71 cu.m |
|
Fresh Water |
359 cu.m |
|
Ballast water tanks |
19 546 cu.m |
|
Cargo loading/unloading time: |
12 hours |
|
Consumption of HFO of M.E. 32.0 t/24 hours Cruising range, (speed 14,4 knots, 20% serv.all) |
16 150 Nm |
|
Crew Complement |
23 |
CLASSIFICATION (LR)
+ 100 A1 DOUBLE HULL OIL AND CHEMICAL TANKER, SPM
CAUSTIC SODA ONLY, MAX. FILLING 67 P.C. (DEPTH) S.G. 1.53 LMC, UMS, IGS, COW. PL, SBT
STEAM PLANT
One oil fired boiler, cap. 19 t/h satur. steam
One economiser, cap. 1.6 t/h satur. steam
AUXILIARY ENGINES PLANT
Three diesel driven el. generators, 60 cycles,
1350kVAeach
One emergency diesel driven el. generator
60 cycles, 109 kVA.
CARGO EQUIPMENT
Cargo pumps:
submerged type, hydraulically driven 10×500 cu.m/h at 12 bar head each 2×100 cu.m/h at 10 bar head, in slop tanks
1x portable submersible type, cap.
70 cu.m/h at 5 bar head
Hydraulic power plant suitable for simult. operation of 8 cargo p.
Cargo piping: stainless steel, AISI 316L
Cargo heating: stainless steel heating coils
Inert gas system: capacity 5750 N cu. m/h
Tank washing: COW and hot sea water, heater 100 cu.m/h
Cargo and slop tanks: 1 cleaning machine per tank
Deck crane for cargo hose handling, hydraulically driven, 150 kN
Ballast pumps: 2×650 cu.m/h at 1.8 bar in pump room, 1×50 cu.m/h at 1.8 bar, eductor